North Carolina well pump repair directory
Find a Trusted Well Pump Repair Pro in North Carolina
Certified Well Contractors, Honest Pricing, Fast Local Help
Compare local well pump repair companies in 18 North Carolina areas, see what repairs and replacements should cost, and figure out what's wrong when your water stops.
Common well pump problems and typical fix cost
- No water at all$150–$3,500Tripped breaker, failed pressure switch, bad control box or capacitor, broken wire, or a failed pump
- Low or surging pressure$150–$1,800Waterlogged or failing pressure tank, worn pressure switch, clogged filter or a weakening pump
- Pump turns on and off rapidly$700–$1,800Waterlogged pressure tank or failed bladder (short cycling)
- Pump runs nonstop$300–$3,500Leak in the line, broken pipe in the well, worn pump or low water level
- Sputtering faucets or air$300–$2,500Low water level, a leak in the drop pipe or a failing check valve
Browse by area
Well pump repair companies across North Carolina
Each area page lists local well pump repair and well service companies, typical repair costs, and what to know about wells in that part of the state.
Well pump repair in Raleigh
Wake County has more people on private wells than any other county in North Carolina.
Well pump repair in Durham
Northern Durham, Orange and Person county homes rely heavily on drilled wells.
Well pump repair in Clayton
Johnston County is one of the fastest-growing well-water counties in the state.
Well pump repair in Charlotte
Wells are common in north and south Mecklenburg and across the county line.
Well pump repair in Monroe
Union County has a large well-water population outside Monroe and Waxhaw.
Well pump repair in Concord
Rural Cabarrus and Stanly County homes rely on private wells.
Well pump repair in Salisbury
Rowan County is one of North Carolina's largest well-water counties.
Well pump repair in Mooresville
Lake Norman's outer neighborhoods and rural Iredell rely on wells.
Well pump repair in Gastonia
Gaston County is one of the top well-water counties in North Carolina.
Well pump repair in Hickory
Catawba County is one of the top well-water counties in the state.
Well pump repair in Greensboro
Guilford County has the second-most well users in North Carolina.
Well pump repair in Winston-Salem
Surry, Stokes and Yadkin county homes rely heavily on wells.
Well pump repair in Asheville
Many Buncombe County homes outside Asheville city water are on wells.
Well pump repair in Hendersonville
Henderson and Transylvania counties rely heavily on private wells.
Well pump repair in Waynesville
Haywood County homes rely heavily on private wells.
Well pump repair in Boone
Most High Country homes and cabins depend on private wells.
Well pump repair in Fayetteville
Cumberland, Sampson and Harnett counties all rank high for well users.
Well pump repair in Southern Pines
Moore County homes outside town water lines rely on wells.
How it works
From no water to fixed
Check the basics
Look at the well pump breaker and the pressure gauge by the tank. If the breaker keeps tripping, stop resetting it and call a pro.
Call a certified contractor
Choose a local company from your area page. Ask for a diagnosis first; many problems are a switch, capacitor or tank, not the pump.
Repair, disinfect and test
After the repair, the well should be disinfected. A follow-up water test confirms your water is safe to drink.
Well pump repair cost
What well pump repair costs in North Carolina
Most North Carolina homeowners pay $1,500 to $3,500 to replace a submersible well pump. Smaller repairs like a pressure switch or capacitor often cost under $600.
| Repair | Typical cost | What it covers |
|---|---|---|
| Pressure switch replacement | $150–$400 | Part and labor; a common fix when the pump will not start or shut off |
| Control box or capacitor | $200–$600 | For 3-wire submersible pumps that will not start |
| Pressure tank replacement | $700–$1,800 | Tank, fittings and labor; size drives the price |
| Jet pump replacement (shallow well) | $800–$2,000 | Above-ground pump for shallow wells, installed |
| Submersible pump replacement | $1,500–$3,500 | Pump, wire and labor for a typical drilled well |
Choosing a contractor
How to choose a well pump repair company
Ask for the certification. North Carolina requires well construction, repair and pump installation to be done by or under the supervision of a certified well contractor, with limited exceptions. Ask for the contractor's North Carolina well contractor certification number.
Diagnose before replacing. A good contractor tests the breaker, pressure switch, control box, tank and pump before recommending a new pump. Many "dead pump" calls turn out to be a $150 to $600 part.
Get it in writing. A clear quote lists the pump brand and horsepower, wire and pipe being replaced, whether the pressure tank is included, disinfection, and the warranty on parts and labor.
Plan for a water test. Pulling a pump opens the well. Expect the well to be disinfected afterward, and consider a bacteria test through your county environmental health office.
Well pump questions North Carolina homeowners ask
How much does well pump repair cost in North Carolina?
Small repairs like a pressure switch or capacitor usually cost $150 to $600. Replacing a submersible pump typically costs $1,500 to $3,500 installed, and a pressure tank $700 to $1,800. Deep wells and mountain sites cost more.
Who is allowed to repair a well pump in North Carolina?
North Carolina requires well construction, repair and pump installation to be done by or under the supervision of a certified well contractor, with limited exceptions such as some work by licensed plumbers. Ask any contractor for their North Carolina well contractor certification.
How do I know if my well pump is going bad?
Watch for no water, low or surging pressure, a pump that cycles on and off rapidly or runs nonstop, sputtering faucets, dirty water and a rising electric bill. Many of these are caused by cheaper parts like the pressure tank or switch, so get a diagnosis before replacing the pump.
How long does a well pump last?
Submersible well pumps commonly last 8 to 15 years. Jet pumps often last a bit less. Short cycling from a bad pressure tank, sediment and power surges shorten pump life.
Should I test my water after a well pump repair?
Yes. Pulling a pump opens the well, so contractors typically disinfect it afterward. A follow-up bacteria test confirms the water is safe. Your county environmental health office can test well water for a fee.
Are you a North Carolina well contractor?
Add your company to the directory. Basic listings are free, and verified companies can upgrade to a featured spot on their city page.